"My showerhead is off-center when it is tightened. How can I center it without leaks?"
Back it off until it is centered; then count the number of turns it takes to remove it. Reapply lots of PTFE thread sealing tape (clockwise), then thread the showerhead onto the arm the same number of turns that it took to remove it.
"What does the 1/2" and 3/4" combination inlet mean?"
These quality shower heads have 3/4" fips threads for a 3/4" shower arm. They also come with a 3/4" x 1/2" bushing to adapt to a 1/2" shower arm.
"Does the showerhead I ordered swivel, or do I need an additional part for it to do so?"
It is rare for a showerhead not to have a swivel feature unless its position adjustment is in the shower arm or it is a "flat" model that is meant to be installed parallel to the floor. With the exception of those mentioned, some industrial models and most handshowers, standard-style showerheads generally come with a built-in swivel feature.
"Do you sell any showerheads that completely shut off water flow?"
No, and we are not aware of any showerheads that have the ability to completely stop water flow. With your shower valve still open and the showerhead completely closed, it is possible for hot water to force itself into the cold water line. Once the showerhead is opened again, only hot water flows for a moment, creating a risk of scalding. Showerheads are normally manufactured to dribble a small amount and prevent this from occurring.
"Do you sell a shower head with an easily removable flow reducer?"
Due to Federal energy savings laws we may not sell a shower head where the water restrictor is "easily removable".
 |
COPYRIGHT © 1995-2008 |