Up to 8% standard shipping to the lower 48 states!

800-581-6186 M-F 8:30am-7:30pm CT

Energy Saving PerformancePro Cascade Pond Pumps:

These are high efficiency, industrial grade pumps, ideal for your pond, water feature, or general transfer and re circulation needs. Cascade pumps produce excellent flow rates at sufficient pressure to really get the job done. The industrial grade Noryl housings are built for long term use. A strainer pot may be attached to facilitate priming and to strain the inflow.

These Cascade pond pumps features: Money saving high efficiency Long life, corrosion resistant, 316 stainless steel shaft seals Impeller interchangeability allows you to easily change your pump's performance Top-of-the-line U.S. motors All 1725 rpm units are "TEFC" (totally enclosed, fan cooled) for excellent protection and long term reliability. TEFC MOTORS: This motor is probably the most commonly used motor in ordinary industrial environments. It costs only a few dollars more than the open motor, yet offers good protection against common hazards. The motor is constructed with a small fan on the rear shaft of the motor, usually covered by a housing. This fan draws air over the motor fins, removing excess heat and cooling the motor. The enclosure is "Totally Enclosed". This ordinarily means that the motor is dust tight, and has a moderate water seal as well. ODP MOTORS: An ODP enclosure on a motor means "Open, Drip Proof". ODP motors are relatively inexpensive motors used in normal applications. The construction of an ODP motor consists of a sheet metal enclosure with vent stamped to allow good air flow. The vents are designed in such a way that water dripping on the motor will not normally flow into the motor. A fan is mounted on the motor's rear shaft to pull air through the motor to keep the motor cool. Both pump ends and motors are designed for quiet operation Safety first—out of pond pumps help protect both you and your fish from annoying and potentially dangerous oil or electrical leaks 3 years manufacturer's limited warranty

Cascade Low 1725 RPM - 115/230volt These pumps use a TEFC motor
Model #	HP	Max Watts	Max Head	Mid Point Flow	Max Flow	Select Item(s)
C 1/8 22	1/8	120	16ft	1100gph @ 13'	2200gph @ 4'
C 1/8 26	1/8	159	20ft	1300gph @ 16'	2600gph @ 4'
C 1/8 36	1/8	186	16ft	1800gph @ 14'	3600gph @ 7'
C 1/4 44	1/4	289	22ft	2200gph @ 19'	4400gph @ 10'
C 1/4 49	1/4	367	23ft	2400gph @ 21'	4900gph @ 13'

We cannot show pricing on the web for these items.
To request a price quote, select the items you are interested in by clicking
the box in the "Select Item(s)" column next to the product.
Click the button below to add items to your quote list.

Cascade High 3450 RPM - 115/230volt
Model #	HP	Motor Type	Amps @ 230v	Max Head	Mid Point Flow	Max Flow	Select Item(s)
C 1/3	1/3	ODP	3.6	56ft	1200gph @ 28'	2370gph @ 3'
C 1/2	1/2	ODP	4.4	71ft	1800gph @ 44'	3500gph @ 7'
C 1/2E	1/2	TEFC	4.4	71ft	1800gph @ 44'	3500gph @ 7'
C 3/4	3/4	ODP	5.9	79ft	2400gph @ 60'	4800gph @ 12'
C 3/4E	3/4	TEFC	5.9	79ft	2400gph @ 60'	4800gph @ 12'
C 1	1	ODP	8.1	80ft	3200gph @ 65'	6400gph @ 20'
C 1E	1	TEFC	8.1	80ft	3200gph @ 65'	6400gph @ 20'
C 1-1/2	1-1/2	ODP	6.6	80ft	3600gph @ 64'	7200gph @ 26'
C 2	2	ODP	13.5	86ft	4500gph @ 75'	8800gph @ 37'

We cannot show pricing on the web for these items.
To request a price quote, select the items you are interested in by clicking
the box in the "Select Item(s)" column next to the product.
Click the button below to add items to your quote list.

Options

Option	Description	Select Item(s)
Saltwater kit	Includes PVC shaft sleeve & stainless hardware
S.S. hardware	Stainless steel hardware
Cord & Plug	8' long 115 volt power cord installed up to 1/3 hp
Cord & Plug	8' long 115 volt power cord installed up to 1 hp

We cannot show pricing on the web for these items.
To request a price quote, select the items you are interested in by clicking
the box in the "Select Item(s)" column next to the product.
Click the button below to add items to your quote list.

Pot Strainer

Pot strainer shown with pump (not included).

To help you protect your PerformancePro Cascade pump investment, we'd like to encourage that you use a pot style strainer. This has 1 1/2" Mips outlet (it fits right into the Cascade model pump inlet) and 1 1/2" Fips inlet (just like the pump).

Description Select Item(s) 1-1/2" Mips x 1-1/2" Fips In-line style pot strainer with basket (mfr by Hayward) O-Ring** replacement for this pot strainer **We recommend using Super Lube on these O-rings

We cannot show pricing on the web for these items.
To request a price quote, select the items you are interested in by clicking
the box in the "Select Item(s)" column next to the product.
Click the button below to add items to your quote list.

Energy Saving PerformancePro Artesian - Pond Pumps:

The Artesian combines high efficiency and reliability with the convenience of self-priming. Molded of corrosion-resistant polypropylene. Artesian pumps are ideal for applications in which the pump is positioned above the water level. An easy-open lid provides ready access to the integral pot strainer's large basket.

These Artesian pond pumps features: Money saving high efficiency pump and motor units Long life, corrosion resistant, 316 stainless steel shaft seals Impeller interchangeability allows you to easily change your pump's performance Top-of-the-line U.S. motors All 1725 rpm units are "TEFC" (totally enclosed, fan cooled) for excellent protection and long term reliability. TEFC MOTORS: This motor is probably the most commonly used motor in ordinary industrial environments. It costs only a few dollars more than the open motor, yet offers good protection against common hazards. The motor is constructed with a small fan on the rear shaft of the motor, usually covered by a housing. This fan draws air over the motor fins, removing excess heat and cooling the motor. The enclosure is "Totally Enclosed". This ordinarily means that the motor is dust tight, and has a moderate water seal as well. ODP MOTORS: An ODP enclosure on a motor means "Open, Drip Proof". ODP motors are relatively inexpensive motors used in normal applications. The construction of an ODP motor consists of a sheet metal enclosure with vent stamped to allow good air flow. The vents are designed in such a way that water dripping on the motor will not normally flow into the motor. A fan is mounted on the motor's rear shaft to pull air through the motor to keep the motor cool. Both pump ends and motors are designed for quiet operation Safety first—out of pond pumps help protect both you and your fish from annoying and potentially dangerous oil or electrical leaks 3 years manufacturer's limited warranty

Artesian Low 1725 RPM - 115/230v These pumps use a TEFC motor.
Model #	HP	Max Watts	Max Head	Mid Point Flow	Max Flow	Select Item(s)
A 1/8 30	1/8	152	17ft	1500gph @ 14'	3000gph @ 4'
A 1/8 35	1/8	187	18ft	1800gph @ 15'	3500gph @ 6'
A 1/4 40	1/4	266	22ft	2000gph @ 18'	3900gph @ 7'
A 1/4 49	1/4	316	21ft	2400gph @ 19'	4900gph @ 9'
A 1/3 56	1/3	428	26ft	2800gph @ 22'	5600gph @ 13'
A 1/2 75	1/2	625	26ft	3600gph @ 23'	7560gph @ 12'

Artesian High 3450 RPM - 115/230v These pumps use a OPD motor
Model #	HP	Amps @ 230v	Max Head	Mid Point Flow	Max Flow	Select Item(s)
A 1/2	1/2	5.4	67ft	2900gph @ 50'	5880gph @ 8'
A 3/4	3/4	5.6	79ft	3200gph @ 62'	6500gph @ 11'
A 1	1	7.4	89ft	3700gph @ 70'	7400gph @ 13'

We cannot show pricing on the web for these items.
To request a price quote, select the items you are interested in by clicking
the box in the "Select Item(s)" column next to the product.
Click the button below to add items to your quote list.

Artesian High 3450 RPM - 230v only These pumps use a OPD motor
Model #	HP	Amps @ 230v	Max Head	Mid Point Flow	Max Flow	Select Item(s)
A 1-1/2	1-1/2	8.5	87ft	4400gph @ 73'	8700gph @ 18'
A 2	2	9.5	89ft	4600gph @ 76'	9300gph @ 19'
A 3	3	13.6	103ft	5400gph @ 82'	10700gph @ 26'

Artesian 2-Speed 3450/1725 RPM - 60Hz These pumps use a OPD motor
Model #	HP	Voltage	Watts	Max Head	Mid Point Flow	Max Flow	Select Item(s)
A2 3/4	3/4 - 1-1/2	115	318	67ft 16ft	3600gph @ 52' 1800gph @ 13ft	7026gph @ 18' 3492gph @ 5ft
A2 1	1-1/6	230	356	68ft 17ft	3900gph @ 58' 1800gph @ 14ft	8064gph @ 20' 3990gph @ 6ft
A2 1-1/2	1-1/2 - 1/4	230	413	80ft 19ft	4800gph @ 67' 2400gph @ 16ft	9186gph @ 30' 4530gph @ 8ft
A2 2	2-1/3	230	480	80ft 20ft	4800gph @ 72' 2400gph @ 17ft	10260gph @ 35' 5028gph @ 8ft

Artesian Dial-A-Flow
Model #	HP	Voltage	RPM	Max Head	Max Flow	Select Item(s)
A1-115	0 - 1hp	115v	Variable - 2580 rpm max	45ft	125gpm @ 10'ft
A1-230	0 - 1hp	230v	Variable - 2580 rpm max	45ft	125gpm @ 10'ft
A2-230	0 - 2hp	230v	Variable - 2940 rpm max	60ft	160gpm @ 20'ft
A3-230	0 - 3hp	230v	Variable - 2940 rpm max	63ft	210gpm @ 31'ft

We cannot show pricing on the web for these items.
To request a price quote, select the items you are interested in by clicking
the box in the "Select Item(s)" column next to the product.
Click the button below to add items to your quote list.

Options

Option	Description	Select Item(s)
Saltwater kit	Includes PVC shaft sleeve & 316 stainless steel seal
Cord & Plug	8' long 115 volt power cord installed
Saltwater kit for Dial-A-Flow Series	Includes PVC shaft sleeve
Shaft sleeve for Dial-A-Flow Series	Includes PVC shaft sleeve

We cannot show pricing on the web for these items.
To request a price quote, select the items you are interested in by clicking
the box in the "Select Item(s)" column next to the product.
Click the button below to add items to your quote list.

to Pond links and information