Up to 8% standard shipping to the lower 48 states!

800-581-6186 M-F 8:30am-7:30pm CT

Pond Pumps

pond treatment/bacteria - non electric budget pump - Little Giant parts - PerformancePro pumps
Zoeller battery powered back-up sump pumps - Sequence brand pond pumps - list of other pumps - pond related links

---

All of these pumps are 115volt - please note cord lengths.

---

Fountain/Statuary Pumps from Little Giant Mfg Submersible Pumps (not for ponds)
Model #	Cord	Wattage	Flow rate	Shut-off	Price & Quantity
PES-A-PW	6'	5	63gph@1'	2'	$30.89
PES-100-PW	6'	5	50gph@3'	4'	$38.96

- Or -

---

Submersible and Pond Pumps from Little Giant Mfg.
Model #	Cord	HP	wattage	flow rate	shut-off	Price & Quantity
PE-A-PW	6'	1/250	17	50gph@3'	4.5'	$44.14
P-AAA	6'	1/160	30	70gph@3'	4'	$55.13
P-AAA-WG	15'	1/160	30	70gph@3'	4'	$53.15
PE-1F-PW	15'	1/125	36	140gph@3'	7'	$54.33
PE-2F-PW	15'	1/125	36	140gph@3'	7'	$77.27
PE-2.5F-PW	15'	1/28	80	440gph@3'	13'	$93.04
PES-700-WG	15'	-	80	576gph@5'	11'	$126.45
5-MSPR-WG	25'	1/6	380	1140gph@3'	26'	$105.03
6-CIM-R	25'	3/10	720	2750gph@5'	18'	$143.71
6E-CIM	25'	1/3	750	2500gph@5'	20'	$174.94

- Or -

---

Little Giant Water Wizard® Utility Pump (#5-ASP)
Motor - 1/6HP Shaded Pole Maximum flow rate - 1200 GPH @ 1', 4542 LPH @ 30 cm. Maximum Head - 26.3'...8 m Intermittent Liquid Temp to - 120° F....49° C Discharge - 1"FNPT (25.4 mm) Housing - Epoxy coated cast aluminum Volute - Nylon Impeller - Nylon Shaft Seal - Viton® Operation - Manual or Automatic Activator - RS-5 Piggyback diaphragm switch Switch on - 6" - 9"; 15cm - 23cm *(approximate) Switch off - 1" - 4"; 2.5cm - 10cm *(approximate) Electrical - 115V, 60Hz, 5 amps, 10' (3m) power cord
Little Giant #5-ASP utility pump $139.38

*The 5-ASP uses a diaphragm pressure switch.
The "switch on/off" specifications are approximates and will vary +/- 1 or more inches depending on your location.

- Or -

---

Submersible Pumps with automatic shutoffs
Model #	Cord	HP	Wattage	Flow Rate	Shut-off	Price & Quantity
5.5-ASP	25'	1/4	588	2200gph@3'	25'	$127.14
6-CIA	10'	3/10	720	2750gph@5'	18'	$158.93
9S-CIM 230 volt	15'	4/10	-	4800gph@5'	18'	$322.54
9S-CIA-RFS	20'	4/10	1020	4800gph@5'	18'	$350.20

- Or -

Large Submersible Pumps by Little Giant Unique dual discharge allows for operation of two water features simultaneously Powerful direct drive pump produces greater starting torque and flow pressure than comparable magnetic drive submersible pumps Designed to operate continuously Corrosion resistant body Environmentally safe (oil-less)

Large Volume Pumps from Little Giant Mfg. specifically designed for water "gardening"
Model #	Cord	Amps	Wattage	Flow Rate	Shut-off	Price & Quantity
WGP-65-PW	16'	2.0	230	1250gph@5'	20'	$132.07
WGP-95-PW	16'	6.3	700	4000gph@5'	30'	$190.04

oil-less - submersible - energy efficient
designed for pond filtration/streams/waterfalls

- Or -

to specially designed pump for swimming pool covers

---

Dual-Purpose Pumps from Little Giant Mfg (in or out of water, must be below water level)
Model #	Cord	HP	Wattage	Flow Rate	Shut-off	Price & Quantity
1-EA-42	10'	1/125	36	140gph@3'	7'	$57.82
2E-38N	6'	1/40	100	255gph@3'	11'	$71.47
3E-12N-WG	15'	1/15	200	435gph@3'	17'	$112.13
3E-34N	10'	1/15	208	650gph@3'	20'	$116.62

- Or -

---

to Little Giant pond liners - to pond treatment (bacteria) - to recirculating pumps - to sewage ejector pumps
to Sequence pond pumps - to fountain pumps - to Grundfos pumps - to Up-Flush toilet pumps
to hand pumps - to big sump pump - to water removal Systems - to float switches - to sump pump alarms
to battery powered backup pumps - to a pump designed for pool covers

---

"Are the pumps you offer on your website high quality pumps?"
Paying more or less for a pump does not necessarily indicate the quality of the pump. We have been selling Little Giant brand pumps ever since we started selling pumps, and, to date, with complete customer satisfaction.

"I need to replace a Little Giant Water Wizard submersible utility pump model #5-MSP. Is your 5-MSPRWG the same; if not do you have a suitable replacement?"
The 5-MSPRWG that we offer is considered a "water garden pump." It comes with a 25 foot cord. It should be a suitable replacement.

"What does shut off at 10' mean?"
It means that the pump cannot pump higher (measured vertically) than 10' (with no friction loss taken into account). If you need to pump higher than that, we would recommend that you purchase a bigger pump.

"Which pump do I need?"
Before you can pick the best pump for your pond, you need to determine what flow rate and total dynamic head (TDH) you want. Since the flow rate is affected by the head it is working against, you must know both parameters to properly select a pump.

• Flow - The exact flow rate you will need depends on many factors including the size of your pond and waterfall as well as the amount of fish, plants and sunlight. In general, most ponds will operate nicely if you turn the water over approximately once an hour. This means if you have a 4000-gallon pond, you want about 4000 gallons per hour or 67 gallons per minute.
• Head - Head is a measure of resistance to flow. If a pump has a maximum output of 20 head feet, it means it can pump water 20' straight up in the air. If a pump is rated at 50 gallons per minute at 10 feet it means it can overcome 10 feet of head (TDH) and still deliver 50 GPM. As you increase the head, you decrease the flow rate. To maximize your flow, you must minimize your head. For pond applications the 3 main sources of head are:
  • Static Head - This is the vertical distance you raise the water. To determine your static head, measure from the surface of the pond (vertically), to the highest point in the discharge line where the water is discharged to the atmosphere. This is usually the top of your biological filter, or waterfall.
  • Friction Head - As water flows through pipe and fittings there is resistance. The higher the flow and/or the smaller the pipe, the higher the resistance. Determine your overall pipe length and consult a friction loss table to determine how much head this will add. Use large enough pipe to minimize your friction loss. It is usually best to keep your friction loss to under 6 feet.
  • Pressure Head - Any additional pressure required by sand filters, spray nozzles, etc. must be calculated. The conversion is 1 PSI = 2.31 head feet.