Up to 8% standard shippingto the lower 48 states!
Toilet Flappers and Related Toilet Repair Parts
Check this box to receive one free leak detector tablet with any purchase on this page
to bronze float/fill valves
MORE toilet fill valves
Quality Flush Valves
Toilet Flappers
"Will Fit" Toilet Flappers for Kohler Toilets
Toilet Flappers For Eljer Toilets
Toilet Flappers For Briggs Toilets
Toilet Flappers For Toto Toilets
"Will Fit" Toilet Flappers For American Standard "Cadet 3" Toilets
Toilet Flappers For Crane Toilets
Tank Balls
Click here to check out our full line of toilet tank levers
Toilet Bolt Caps (plastic) set of 2 each
Wobble Wedges - Toilet Shims Levels toilet bowl, prevents rocking, & easily trimmed with a knife
Protects tank parts while keeping the bowl clean with every flush!
"What's the best way to replace my toilet flapper?" Generally, with most toilets: turn off the water supply. Reach in and unhook the ears of the flapper and unhook the chain from the trip lever. Install an identical flapper to the original that came from the factory. Do expect to get your hands dirty from the old flapper. Simply reinstall the new one in reverse order. Note that should you have very old brass pipes inside of your toilet, be careful not to be rough on them. They can easily break and end up leaking. After you have replaced your flapper, and the toilet tank bowl has refilled, the water fill valve should not leak (be going on and off in cycles). If it does, then we recommend putting some food coloring into your tank. This can help diagnose the problem. The colored water should not be going into the bowl (unless you flush that toilet of course). If the food color does go into the bowl, then possibly the flapper is not the correct one, or maybe the surface where the toilet flapper sits, has eroded (feel below where the flapper touched the toilet and see if you can feel erosion/grove).
"How long 'should' the parts inside of my toilet last?" That depends on a number of variables and which parts. Water quality is one of the major factors. If your water source is heavily chlorinated then many parts won't last long. Or if you have a lot of sand or grit or have a low pH or "aggressive" water source then parts simply won't last as long as the 'average' length. Also the quality of the parts matters. The replaceable parts such as flappers and washers/seals generally will last at least 4 to 5 years on "average." If you use a bowl cleaner some flappers won't even last one year. If your flapper has black "goo" on it then it is either due to age or quality of your water and if it feels soft then it's best to change it.
ABOUT US
ORDERING INFO
GENERAL FAQ's
SHIPPING FAQ's
PRIVACY GUARANTEE
RETURN POLICY
CONTACT US
COPYRIGHT © 1995-2008