Tubular Drain Products

Teka USA designer kitchen sinks - American Standard kitchen faucets - stainless sinks by Kindred
LeBijou bathroom products page - kitchen faucets from Danze
PTFE, plumber's, duct and thread sealing tape - basket strainers - special finish/colored basket strainers
hard-to-find 1 3/8" tub drains - Rockford grease traps (interceptors)

Durable P-Trap Kit

Black ABS/Polypropylene
Item Description Price & Quantity
P-trap kit (shown above) - for kitchen and bathroom sink drains $3.29
Continuous waste kit, end outlet $4.49
Continuous waste kit, center outlet $4.59
Slip-joint extension, 1 1/2" x 8" $2.39
Slip-joint extension, double ended, 1 1/2" x 16" $3.19
Flanged tailpiece, 1 1/2" x 8" $1.89
Flanged tailpiece, double ended, 1 1/2" x 16" $2.29
Note: Unless otherwise stated, all are 1-1/2" O.D. (O.D. = outside dimensions)

Note that these will also fit 1 1/2" outside dimension white plastic drains.

- Or -

to trap catchers - to "no clog" T-traps

Chrome (Brass) Traps
Item Description Price & Quantity
1 1/4" P-trap, 22 gauge $15.81
1 1/4" P-trap, 17 gauge $22.14
1 1/2" P-trap, 22 gauge $16.42
1 1/2" P-trap, 17 gauge $28.16
1 1/2" P-trap, 17 gauge, with clean out $32.11
1 1/2" S-trap, 22 gauge **NOT CODE** $27.54

- Or -

Flexible Plastic Drain Connectors (Pipe)
J-Bend
Flexible J-Bend
Flexible Coupling
Flexible Extension

Uses: Quickly and economically connects offset sink drains

Item Description Price & Quantity
1-1/2" Flexible J-Bend (with 1 each: 1-1/2" x 1-1/4" slip joint washer) $4.99
1-1/2" x 6" Flexible Coupling (with 2 each: 1-1/2" x 1-1/4" slip joint washer) $3.99
1-1/4" x 8" Flexible Extension (slip joint) $3.89
1-1/2" x 12" Flexible Extension (with 1 each: 1-1/2" x 1-1/4" slip joint washer) $3.99
1-1/2" Plastic Tubular Flexible P-Trap Kit For Kitchen and Bathroom Sink Drains
(with 1 each: 1-1/2" x 1-1/4" slip joint washer) $5.98

- Or -

Continuous Waste Kits

Center outlet style shown above
Item Description

Price & Quantity
End outlet - continuous waste kit $27.42
Center outlet - continuous waste kit $29.85

- Or -

Slip-Joint Extensions

Item Description Price & Quantity
1 1/4" x 8" slip-joint extension $7.32
1 1/4" x 12" slip-joint extension $8.43
1 1/2" x 8" slip-joint extension $7.96
1 1/2" x 16" double ended slip-joint extension $15.49

- Or -

Threaded Tailpieces

Item Description Price & Quantity
1 1/4" x 8" threaded tailpiece $7.49
1 1/4" x 12" double threaded tailpiece $9.92
1 3/8" x 12" threaded tailpiece $17.77
1 1/2" x 8" threaded tailpiece $8.29
1 1/2" x 12" double threaded tailpiece $10.84

- Or -

Flanged Tailpieces

Item Description Price & Quantity
1 1/2" x 8" flanged tailpiece $5.89
1 1/2" x 16" double ended flanged tailpiece $10.45

- Or -

Slip Joint Tailpiece (Also Known As Extension Tubes)
1 1/4"OD x 8" 17 Gauge Stainless Steel
Slip Join Extension Tubes

Finish Price & Quantity
Brushed Nickel $37.18
Polished Nickel $37.50
Pearl Nickel $41.43
Pewter $41.59
Antique Copper $41.28
Polished Copper $41.30
Weathered Copper $41.40
Satin Brass $41.40
PVD Polished Brass $41.74
Oil-Rubbed Bronze $41.40
PVD Brushed Bronze $45.86
Venetian Bronze $41.54
Tuscan Brass $45.89
Matte Black $37.35
Satin Gold $41.31
Polished Gold $41.28
French Gold $45.57

- Or -

to bathroom sink drains - to vessel sink drains

1-1/2 P-Trap

Quality Polished Brass Finished Products
Item Description Price & Quantity
1 1/4" P-trap - polished brass $49.45
1 1/2" P-trap - polished brass $59.69
1 1/4" x 8" slip-joint extension - polished brass $21.77
1 1/2" x 8" slip-joint extension - polished brass $23.01
1 1/4" x 8" threaded tailpiece - polished brass $19.76
1 1/4" x 12" double threaded tailpiece - polished brass $19.76

- Or -

Drains For Bathroom Sinks
click here for many more bathroom sink drains

Deluxe Two-Piece Lavatory Pop-Up Assemblies
1-1/4" O.D.
Two piece pop-up assembly
Shown with overflow holes

Item Description Finish Price & Quantity
With overflow holes
polished chrome $18.95
PVD polished brass $29.95
PVD satin nickel $29.89
Less overflow holes
(special) polished chrome $18.95
PVD polished brass $33.84
PVD satin nickel $33.79
Note: Not every pop up assembly will fit every brand faucet

- Or -

click here for many more bathroom sink drains

Washers

Item Description Price & Quantity
1-1/4" Poly SJ Washer $0.04
1-1/2" Poly SJ Washer $0.10
1-1/2" x 1-1/4" Poly SJ Washer $0.10
1-1/2" Poly Tailpiece Washer $0.05

- Or -

Slip Joints

Item Description Price & Quantity
1-1/2" Slip Joint Union $1.07
1-1/2" 45 Degree Slip Joint $1.28
1-1/2" 90 Degree Slip Joint $1.08

- Or -

Slip Joint Extensions

Item Description Price & Quantity
1-1/4" x 8" Slip Joint - Chrome Extension With Nut $7.32
1-1/4" x 12" Slip Joint - Chrome Extension With Nut $8.43
1-1/4" x 8" Slip Joint - Polished Brass Extension With Nut $21.77
Chrome on Brass 1-1/2" x 8" Tubular Slip Joint Extension $7.96
1-1/2" x 16 Tubular Double Slip Joint Extension $3.19
Chrome on Brass 1-1/2" x 16" Tubular Double Slip Joint Extension $15.49
1-1/2" x 12" ABS Slip Joint Extension $1.08
1-1/2" x 8" ABS Polypropylene Tubular Slip Joint Extension $1.39
1-1/2" x 8 Polished Brass Slip Joint Extension $23.01

- Or -

Tubular Continuous Waste Kit

Item Description Price & Quantity
ABS/Polypropylene 1-1/2" Tubular Continuous Waste Kit - Center Outlet $4.59
1-1/2" Tee For Continuous Waste Kit - Center Outlet $1.41
ABS/Polypropylene 1-1/2" Tubular Continuous Waste Kit - End Outlet $4.49
1-1/2" Tee For Continuous Waste Kit - End Outlet $1.41
Chrome On Brass 1-1/2" Tubular Continuous Waste Kit - Center Outlet $29.85
Chrome On Brass 1-1/2" Tubular Continuous Waste Kit - End Outlet $29.85

- Or -

Flex Extensions

Item Description Price & Quantity
1-1/4" Flex Extension $0.98
1-1/2" Flex Extension $0.98
1-1/2" Flex Coupling $0.91
1-1/2" Flex J Bend $1.27
1-1/4" x 1-1/2" Flex P-Trap $1.80

- Or -

P-Traps - J-Bends

Item Description Price & Quantity
1-1/4" Polished Brass P-Trap $49.45
1-1/2" Polished Brass P-Trap $59.69
1-1/2" ABS Trap Arm - Beveled $1.47
1-1/4" PVC Tubular P-Trap $1.32
1-1/2" O.D. Tubular Repair Trap $0.77
1-1/2" x 1-1/4" Reducing P-Trap $0.77
1-1/4" PVC J-Bend $0.93
1-1/2" ABS J-Bend $1.01
1-1/2" SJ J-Bend With CO $1.85
1-1/2" ABS/Polypropylene - Black Colored Tubular P-Trap
(includes 1 ea 1-1/2" x 1-1/4" reducing slip joint washer) $0.91

- Or -

P-Trap Kits

Item Description Price & Quantity
Chrome on Brass 1-1/4" Tubular P-Trap Kit - 17 Gauge $22.14
Chrome on Brass 1-1/4" Tubular P-Trap Kit - 22 Gauge $15.81
Chrome on Brass 1-1/2" Tubular P-Trap Kit - 17 Gauge $28.16
Chrome on Brass 1-1/2" Tubular P-Trap Kit - 22 Gauge $16.42
Chrome on Brass 1-1/2" Tubular P-Trap Kit With Clean-Out 17 Gauge $32.11

- Or -

S-Trap Kit

Item Description Price & Quantity
Chrome on Brass 1-1/2" Tubular S-Trap Kit 22 Gauge **NOT CODE** $27.54

- Or -

Tail Pieces

Item Description Price & Quantity
1-1/2"O.D. x 1-1/2" ABS Tailpiece $0.23
1-1/2" x 4" ABS Tailpiece $0.45
1-1/2" x 8" ABS/Polypropylene Tubular Flanged Tailpiece $1.89
1-1/2" x 12" ABS Tailpiece $0.87
1-1/2" x 16" ABS Polypropylene Tubular Double Flanged Tailpiece $2.29
1-1/4" x 12" Polished Brass Threaded Tailpiece $19.76
Chrome On Brass 1-3/8" x 12" Tubular Threaded Tailpiece $17.77
Chrome On Brass 1-1/4" x 8" Tubular Threaded Tailpiece $9.92
Chrome On Brass 1-1/4" x 12" Tubular Double Threaded Tailpiece $9.92
Chrome On Brass 1-1/2" x 12" Tubular Double Threaded Tailpiece $10.84
Chrome On Brass 1-1/2" x 16" Tubular Double Flanged Tailpiece $10.45
Chrome On Brass 1-1/2" x 8" Tubular Threaded Tailpiece $8.29
Chrome On Brass 1-1/2" x 8" Tubular Flanged Tailpiece $5.89

- Or -

Deluxe Lavatory Brass Pop-up Assemblies

Item Description Price & Quantity
1-1/4" (2 Piece) With Overflow Drain Holes - Chrome $18.95
1-1/4" (2 Piece) Less Overflow Holes - Chrome $18.95
1-1/4" (2 Piece) Less Overflow Holes - PVD Polished Brass $33.84
1-1/4" (2 Piece) Less Overflow Holes - PVD Satin Nickel $33.79
1-1/4" (2 Piece) With Overflow Drain Holes - PVD Satin Nickel $29.89

- Or -

Dishwasher WYE

Item Description Price & Quantity
1-1/2" x 5/8" ABS SJ Wye Extension $0.88
1-1/2" x 7/8" ABS SJ Wye Extension $0.88
1-1/2" x 6" Glue Extension $0.59
1-1/2" x 8" Glue Extension $0.82
1-1/2" x 12" Glue Extension $1.08

- Or -

Waste Arms

Item Description Price & Quantity
1-1/2" x 7" Flanged Waste Arm - ABS $1.17
1-1/2" x 7" SJ Waste Arm - ABS $2.99
1-1/2" x 15" Waste Arm For SJ - ABS $3.49
1-1/2" x 29" Waste Arm For SJ - ABS $4.99
1-1/2" x 7" Direct Connect Waste Arm - ABS
(tailpiece washer sold separately) $1.99
1-1/2" x 15" Direct Connect Waste Arm - ABS
(tailpiece washer sold separately) $2.69
Chrome on Brass 1-1/2" x 7" Direct Connect Waste Arm
(rubber washer sold separately) $7.99
Rubber washer $0.49

- Or -

Nut

Item Description Price & Quantity
1-1/4" Poly SJ Nut With Built In Washer $0.22
1-1/2" SJ Nut With Built In Washer $0.26
1-1/2" ABS SJ Nut $0.15

- Or -

Slip Joint vs Direct Connect
The image below shows the differences between a slip joint connection and a direct connect fitting.

Slip Joint Connection

Direct Connect

"What do you mean when you say '1 piece' and '2 piece' pop-up assemblies? Don't these all have more pieces than that?"
One-piece or two-piece refers to the pop-up body that attaches the sink to the drain pipe. The 1 piece body has the fitting for the pop-up lever in the part that is installed when the drain flange is installed, thus making the alignment to the pop-up rod more difficult than the 2 piece. The 2 piece body has the fitting for the pop-up lever in a separate part that is installed after the drain flange has been installed, making the alighment with the pop-up rod much easier.

questions about ABS fittings "What is ABS pipe?"
answers about ABS fittings Acrylonitrile Butadiene Styrene (ABS) pipe is mainly used for drain, waste, vent and sewage applications.

"What do you mean by "PVD" polished brass?"
"PVD" stands for "Physical Vapor Deposition" which is a modern plating process used in faucet manufacturing. Vaporized zirconium reacts with nitrogen and other gases to form a VERY durable plated surface. Unlike polished brass finishes in the past that would easily tarnish over time, polished brass finishes with PVD are extremely durable and won't generally tarnish or discolor.

"Are the brass and antique finishes as durable as chrome?"
No, we like to recommend only chrome finishes as they will not tarnish with proper care.

We offer many thoughts (quotes) to ponder, such as:
"I have little patience with scientists who take a board of wood, look for its thinnest part, and drill a great number of holes where drilling is easy." - Albert Einstein

Black ABS/Polypropylene
Item Description	Price & Quantity
P-trap kit (shown above) - for kitchen and bathroom sink drains	$3.29
Continuous waste kit, end outlet	$4.49
Continuous waste kit, center outlet	$4.59
Slip-joint extension, 1 1/2" x 8"	$2.39
Slip-joint extension, double ended, 1 1/2" x 16"	$3.19
Flanged tailpiece, 1 1/2" x 8"	$1.89
Flanged tailpiece, double ended, 1 1/2" x 16"	$2.29
Note: Unless otherwise stated, all are 1-1/2" O.D. (O.D. = outside dimensions)

Chrome (Brass) Traps
Item Description	Price & Quantity
1 1/4" P-trap, 22 gauge	$15.81
1 1/4" P-trap, 17 gauge	$22.14
1 1/2" P-trap, 22 gauge	$16.42
1 1/2" P-trap, 17 gauge	$28.16
1 1/2" P-trap, 17 gauge, with clean out	$32.11
1 1/2" S-trap, 22 gauge NOT CODE	$27.54

Flexible Plastic Drain Connectors (Pipe)
Flexible J-Bend	Flexible Coupling	Flexible Extension

Item Description	Price & Quantity
1-1/2" Flexible J-Bend (with 1 each: 1-1/2" x 1-1/4" slip joint washer)	$4.99
1-1/2" x 6" Flexible Coupling (with 2 each: 1-1/2" x 1-1/4" slip joint washer)	$3.99
1-1/4" x 8" Flexible Extension (slip joint)	$3.89
1-1/2" x 12" Flexible Extension (with 1 each: 1-1/2" x 1-1/4" slip joint washer)	$3.99
1-1/2" Plastic Tubular Flexible P-Trap Kit For Kitchen and Bathroom Sink Drains (with 1 each: 1-1/2" x 1-1/4" slip joint washer)	$5.98

Price & Quantity
End outlet - continuous waste kit	$27.42
Center outlet - continuous waste kit	$29.85

Item Description	Price & Quantity
1 1/4" x 8" slip-joint extension	$7.32
1 1/4" x 12" slip-joint extension	$8.43
1 1/2" x 8" slip-joint extension	$7.96
1 1/2" x 16" double ended slip-joint extension	$15.49

Item Description	Price & Quantity
1 1/4" x 8" threaded tailpiece	$7.49
1 1/4" x 12" double threaded tailpiece	$9.92
1 3/8" x 12" threaded tailpiece	$17.77
1 1/2" x 8" threaded tailpiece	$8.29
1 1/2" x 12" double threaded tailpiece	$10.84

Item Description	Price & Quantity
1 1/2" x 8" flanged tailpiece	$5.89
1 1/2" x 16" double ended flanged tailpiece	$10.45

Finish	Price & Quantity
Brushed Nickel	$37.18
Polished Nickel	$37.50
Pearl Nickel	$41.43
Pewter	$41.59
Antique Copper	$41.28
Polished Copper	$41.30
Weathered Copper	$41.40
Satin Brass	$41.40
PVD Polished Brass	$41.74
Oil-Rubbed Bronze	$41.40
PVD Brushed Bronze	$45.86
Venetian Bronze	$41.54
Tuscan Brass	$45.89
Matte Black	$37.35
Satin Gold	$41.31
Polished Gold	$41.28
French Gold	$45.57

Item Description	Price & Quantity
1-1/4" Poly SJ Washer	$0.04
1-1/2" Poly SJ Washer	$0.10
1-1/2" x 1-1/4" Poly SJ Washer	$0.10
1-1/2" Poly Tailpiece Washer	$0.05

Item Description	Price & Quantity
1-1/2" Slip Joint Union	$1.07
1-1/2" 45 Degree Slip Joint	$1.28
1-1/2" 90 Degree Slip Joint	$1.08

Item Description	Price & Quantity
1-1/4" x 8" Slip Joint - Chrome Extension With Nut	$7.32
1-1/4" x 12" Slip Joint - Chrome Extension With Nut	$8.43
1-1/4" x 8" Slip Joint - Polished Brass Extension With Nut	$21.77
Chrome on Brass 1-1/2" x 8" Tubular Slip Joint Extension	$7.96
1-1/2" x 16 Tubular Double Slip Joint Extension	$3.19
Chrome on Brass 1-1/2" x 16" Tubular Double Slip Joint Extension	$15.49
1-1/2" x 12" ABS Slip Joint Extension	$1.08
1-1/2" x 8" ABS Polypropylene Tubular Slip Joint Extension	$1.39
1-1/2" x 8 Polished Brass Slip Joint Extension	$23.01

Item Description	Price & Quantity
ABS/Polypropylene 1-1/2" Tubular Continuous Waste Kit - Center Outlet	$4.59
1-1/2" Tee For Continuous Waste Kit - Center Outlet	$1.41
ABS/Polypropylene 1-1/2" Tubular Continuous Waste Kit - End Outlet	$4.49
1-1/2" Tee For Continuous Waste Kit - End Outlet	$1.41
Chrome On Brass 1-1/2" Tubular Continuous Waste Kit - Center Outlet	$29.85
Chrome On Brass 1-1/2" Tubular Continuous Waste Kit - End Outlet	$29.85

Item Description	Price & Quantity
1-1/4" Flex Extension	$0.98
1-1/2" Flex Extension	$0.98
1-1/2" Flex Coupling	$0.91
1-1/2" Flex J Bend	$1.27
1-1/4" x 1-1/2" Flex P-Trap	$1.80

Item Description	Price & Quantity
1-1/4" Polished Brass P-Trap	$49.45
1-1/2" Polished Brass P-Trap	$59.69
1-1/2" ABS Trap Arm - Beveled	$1.47
1-1/4" PVC Tubular P-Trap	$1.32
1-1/2" O.D. Tubular Repair Trap	$0.77
1-1/2" x 1-1/4" Reducing P-Trap	$0.77
1-1/4" PVC J-Bend	$0.93
1-1/2" ABS J-Bend	$1.01
1-1/2" SJ J-Bend With CO	$1.85
1-1/2" ABS/Polypropylene - Black Colored Tubular P-Trap (includes 1 ea 1-1/2" x 1-1/4" reducing slip joint washer)	$0.91

Item Description	Price & Quantity
Chrome on Brass 1-1/4" Tubular P-Trap Kit - 17 Gauge	$22.14
Chrome on Brass 1-1/4" Tubular P-Trap Kit - 22 Gauge	$15.81
Chrome on Brass 1-1/2" Tubular P-Trap Kit - 17 Gauge	$28.16
Chrome on Brass 1-1/2" Tubular P-Trap Kit - 22 Gauge	$16.42
Chrome on Brass 1-1/2" Tubular P-Trap Kit With Clean-Out 17 Gauge	$32.11

Item Description	Price & Quantity
Chrome on Brass 1-1/2" Tubular S-Trap Kit 22 Gauge NOT CODE	$27.54

Item Description	Price & Quantity
1-1/2"O.D. x 1-1/2" ABS Tailpiece	$0.23
1-1/2" x 4" ABS Tailpiece	$0.45
1-1/2" x 8" ABS/Polypropylene Tubular Flanged Tailpiece	$1.89
1-1/2" x 12" ABS Tailpiece	$0.87
1-1/2" x 16" ABS Polypropylene Tubular Double Flanged Tailpiece	$2.29
1-1/4" x 12" Polished Brass Threaded Tailpiece	$19.76
Chrome On Brass 1-3/8" x 12" Tubular Threaded Tailpiece	$17.77
Chrome On Brass 1-1/4" x 8" Tubular Threaded Tailpiece	$9.92
Chrome On Brass 1-1/4" x 12" Tubular Double Threaded Tailpiece	$9.92
Chrome On Brass 1-1/2" x 12" Tubular Double Threaded Tailpiece	$10.84
Chrome On Brass 1-1/2" x 16" Tubular Double Flanged Tailpiece	$10.45
Chrome On Brass 1-1/2" x 8" Tubular Threaded Tailpiece	$8.29
Chrome On Brass 1-1/2" x 8" Tubular Flanged Tailpiece	$5.89

Item Description	Price & Quantity
1-1/4" (2 Piece) With Overflow Drain Holes - Chrome	$18.95
1-1/4" (2 Piece) Less Overflow Holes - Chrome	$18.95
1-1/4" (2 Piece) Less Overflow Holes - PVD Polished Brass	$33.84
1-1/4" (2 Piece) Less Overflow Holes - PVD Satin Nickel	$33.79
1-1/4" (2 Piece) With Overflow Drain Holes - PVD Satin Nickel	$29.89

Item Description	Price & Quantity
1-1/2" x 5/8" ABS SJ Wye Extension	$0.88
1-1/2" x 7/8" ABS SJ Wye Extension	$0.88
1-1/2" x 6" Glue Extension	$0.59
1-1/2" x 8" Glue Extension	$0.82
1-1/2" x 12" Glue Extension	$1.08

Item Description	Price & Quantity
1-1/2" x 7" Flanged Waste Arm - ABS	$1.17
1-1/2" x 7" SJ Waste Arm - ABS	$2.99
1-1/2" x 15" Waste Arm For SJ - ABS	$3.49
1-1/2" x 29" Waste Arm For SJ - ABS	$4.99
1-1/2" x 7" Direct Connect Waste Arm - ABS (tailpiece washer sold separately)	$1.99
1-1/2" x 15" Direct Connect Waste Arm - ABS (tailpiece washer sold separately)	$2.69
Chrome on Brass 1-1/2" x 7" Direct Connect Waste Arm (rubber washer sold separately)	$7.99
Rubber washer	$0.49

Item Description	Price & Quantity
1-1/4" Poly SJ Nut With Built In Washer	$0.22
1-1/2" SJ Nut With Built In Washer	$0.26
1-1/2" ABS SJ Nut	$0.15